0

Bootable Usb Pen Drive

Bootable Usb Pen drive is simple and fast way to format your PC or Laptop. After formatting you can easily install windows in your system. Bootable usb pendrive has several advantage as like easy formatting, easy copy and past windows file and after that easy to installing windows. Now we are discussing some important step to make bootable pen drive.

Advantages :

  • Installing process through bootable usb pen drive is much better then DVD.
  • Easy to carrying.
  • Easy to handle and no need to expert. 
  • Best option for all who haven’t DVD drive in his PC or Laptop.

Requirement :

  • Blank (empty) Pen drive with minimum capacity of 4Gb.

Process :


Step 1 :

Plug-in your pen drive in Laptop.


Step 2 :

Go to Start  >> Type Cmd  (in search program and file)  [Press Enter]
After pressing Enter command prompt will open.
On your Caps lock


Step 3 :

Type  DISKPART   [Press Enter]
bootable usb pen drive

Step 4 :

Type  LIST  DISK    [Press Enter]
It will show all available disk in your system. Disk 0 is usually hard disk of your system. In my case Disk 1 is Usb pen drive (This can be different in your case so plz make sure )


Step 5 :

Type  SELECT  DISK  1  [Press Enter]

Step 6 :

Type  CLEAN  [Press Enter]

Step 7 :

Type  CREATE  PARTITION  PRIMARY   [Press Enter]

Step 8 :

Type  SELECT  PARTITION  1  [Press Enter]

Step 9 :

Type  ACTIVE  [Press Enter]

Step 10 :

Type FORMAT  FS=NTFS  [Press Enter]
Wait Until 100% complete.

Step 11 :

Type  ASSIGN  [Press Enter]

Step 12 :

Type EXIT [Press Enter]
Bootable Usb Pen driveNow bootable usb pen drive is ready to use. After making this copy and paste windows 7 or 8 in your pen drive. It is easiest way to install windows 7 or 8 in your  system.
When you want to install windows, plug-in bootable pen drive and restart the system and press boot function key as per different system (f1——-f12) .

You flow step by step

1.Change the BIOS boot order so the USB device option is listed first.
2. Attach the USB device to your computer via any available USB port.
3. Restart your computer.
4. Watch for a Press any key to boot from external device... message.
 5. Bootable CD/DVD stick.
( Boot ISOs from your keychain. Flash drive with CD/DVD emulation.)



Tips:

  1. Recheck the boot order in BIOS (Step 1). The number one reason a bootable flash drive or other USB device won't boot is because BIOS is not configured to check the USB port first.
  2. Didn't find a "USB Device" boot order listing in BIOS? If your computer was manufactured around 2001 or before, it may not have this ability. If your computer is newer, check for some other ways that the USB option might be worded. In some BIOS versions, it's called "Removable Devices" or "External Devices".
  3. Remove other USB devices. Other connected USB devices, like printers, external media card readers, etc., could be consuming too much power, or causing some other problem, which is preventing the computer from booting from flash drive or other device. Unplug all other USB devices and try again.
  4. Switch to another USB port. The BIOS on some motherbord only check the first few USB ports. Switch to another USB port and restart your computer.
  5. Copy the files to the USB device again. If you created the bootable flash drive or external hard drive yourself, which you probably did, repeat whatever steps you took again. You may have made a mistake during the process.

Post a Comment

 
Top